#Gxp2170 audio loopback full
#Gxp2170 audio loopback password

After you have finished entering these settings, click on the Save and Apply button to apply/save your settings:ДЇinally from the side menu bar, locate the Feature Codes configuration page. On this page, configure your settings in-line with those detailed in the screenshots below. Next, click on Call Settings which is located on the side menu bar. After you have finished entering these settings, click on the Save and Apply button to apply/save your settings:Д¬heck/enable both in-audio and via RTP (RFC2833) On this page, please use the settings detailed in the screen captures below. Next, click on Audio Settings which is located on the side menu bar. After you have finished entering this setting, click on the Save and Apply button to apply/save your settings: On this page, locate the option Accept Incoming SIP from Proxy Only and set it to Yes. Next, from the side menu bar, navigate to the SIP Settings > Security Settings. After you have finished entering these settings, click on the Save and Apply button to apply/save your settings: On this page, please configure your settings in-line with those detailed in the screenshots below. Next, locate the Network Settings menu option on the side menu bar.

#Gxp2170 audio loopback password

You may edit the SIP password you wish to use in by logging into your My Callcentric account and clicking on the Extension menu link and then modifying the appropriate extension. Your extension SIP password is the password you created for the extension you are trying to use. You cannot register to your account using only the extension number.Д®nter your extension SIP Password here. This is either the default extension 1777MYCCID OR 1777MYCCIDEXT, where 1777MYCCID is the 1777 number assigned to you by Callcentric and EXT is the three digit extension you are trying to register this UA to.ДЇor example: 17770001234101 would register to extension 101 on account 17770001234. After doing so, click on the Save and Apply button to apply/save your settings: Please configure your settings in-line with those detailed in the screenshot below. You should now be in the General Settings configuration page of your IP phone. After doing so, select the Account 1 option from the sub menu on the top of the screen. Login to the GXP2170's administrative interface by using the default username admin and default password admin.ДЇrom the top menu bar, click on the Account option. If you need additional assistance with any specific issue please let us know. Note: Although this device supports many advanced features/options, this guide will only detail the specific settings which are required to establish basic connectivity between your GXP2170 and our service. We recommend that you read each step through in its entirety before performing the action(s) indicated within the step. Before proceeding, please ensure that you have properly added the device to your network by connecting it to your router or gateway. In this guide we will go through configuring the GXP2170 in order to register to the Callcentric servers so that you will be able to place and receive calls using your Callcentric account. For information on configuring your GXP2170 with a static IP address, please refer to the GXP2170 user manual. These instructions are also based on using the GXP2170 in its factory default configuration, which obtains a dynamic IP address automatically from your router using DHCP. These instructions are based on Grandstream GXP2170 firmware version 1.0.9.26 if you are running a different firmware version, some menus/settings may be different. Notable features include a 4.3 inch (480x272) color-screen LCD, Bluetooth, 12 line keys, 5 soft keys, support for up to 6 SIP accounts, and dual gigabit ports with integrated PoE.

#Gxp2170 audio loopback full

Grandstream's GXP2170 is a powerful, full featured IP phone that is ideal for busy users. Security considerations for Callcentric customers